Q6 Contour — Main Deck Contour Limits

The 243.8 cm (96 in) main-deck contour, mapped to IATA letter A. Close to a cube: full width is carried nearly to the top, which is why 96 in pallets build high.

Industry label
Q6
IATA contour letter
A
Deck
Main Deck
Maximum height
243.8 cm / 96 in
Base width
243.8 cm / 96 in
Base length
317.5 cm / 125 in
Where the taper starts
220 cm / 86.6 inFull width is carried up to 220 cm, then the section narrows toward the top.

Permitted width at height

Read as: at the stated height above the pallet or container floor, this is the maximum overall width the build may occupy. A load that exceeds any single row is out of contour, even if it is under the maximum height.

Q6 section, 243.8 cm tall on a 243.8 × 317.5 cm base.
Height above floorMaximum widthTaper
0 cm / 0 in243.8 cm / 96 infull base width
220 cm / 86.6 in243.8 cm / 96 infull base width
235 cm / 92.5 in225 cm / 88.6 in−18.8 cm (7.4 in) narrower
243.8 cm / 96 in200 cm / 78.7 in−43.8 cm (17.2 in) narrower

Verification status

Aircraft

Positions accepting this contour are recorded on: B747F, B777F. A main-deck contour is never a lower-deck limit — the same PMC that takes 116 in or 118 in on a freighter main deck is limited to about 64 in in a wide-body passenger belly.

AircraftTypeMain deckLower deck
Boeing 747-8FFreighter33 positions · 317.5 cm wide32 positions · 162.6 cm limit
Boeing 777FFreighter27 positions · 317.5 cm wide28 positions · 162.6 cm limit

ULDs built to Q6

CodeAlso codedClassMax gross
AMAM1/AMK/AKMContainer6,804 kg / 15,000 lb
PMCP6/PMPallet6,804 kg / 15,000 lb
PAGPA/P1Pallet6,032 kg / 13,298 lb
PGAM2Pallet11,340 kg / 25,000 lb
PRA—Pallet11,340 kg / 25,000 lb

Test a build against the Q6 contourSimulated buildup places cargo in the section and flags over contour, in 2D profile and 3D.