Single-width lower-deck section on a 243.8 cm (96 in) base, the 767 belly fit.
Industry label
LD8
IATA contour letter
Not establishedNo IATA letter could be matched to this label in published sources.
Deck
Lower Deck
Maximum height
162.6 cm / 64 in
Base width
153.4 cm / 60.4 in
Base length
243.8 cm / 96 in
Where the taper starts
140 cm / 55.1 inFull width is carried up to 140 cm, then the section narrows toward the top.
Permitted width at height
Read as: at the stated height above the pallet or container floor, this is the maximum overall width the build may occupy. A load that exceeds any single row is out of contour, even if it is under the maximum height.
LD8 section, 162.6 cm tall on a 153.4 × 243.8 cm base.
Height above floor
Maximum width
Taper
0 cm / 0 in
153.4 cm / 60.4 in
full base width
100 cm / 39.4 in
153.4 cm / 60.4 in
full base width
140 cm / 55.1 in
153.4 cm / 60.4 in
full base width
162.6 cm / 64 in
140 cm / 55.1 in
−13.4 cm (5.3 in) narrower
Verification status
Aircraft
Positions accepting this contour are recorded on: B767. A main-deck contour is never a lower-deck limit — the same PMC that takes 116 in or 118 in on a freighter main deck is limited to about 64 in in a wide-body passenger belly.